audiohobby

Price

210 € - 600 €

Audiotechnology

Information

COVID-19 Update
Audiotechnology

Audiotechnology:

Flex Units Loudspeaker Drivers

The Flexunits system was developed to fulfill individual data as desired, and we are able to meet even the most specific individual requirements – mechanical as well as electrical.

Fs, Vas and Qts can all be modified and the coil former can be made of either aluminium or Kapton. In special cases the...

Audiotechnology:

Flex Units Loudspeaker Drivers

The Flexunits system was developed to fulfill individual data as desired, and we are able to meet even the most specific individual requirements – mechanical as well as electrical.

Fs, Vas and Qts can all be modified and the coil former can be made of either aluminium or Kapton. In special cases the cone material and suspensions can also be changed.

Gap height and coil length as well as diameter can be selected individually and the magnet size can be altered to fit the needed strength required.

For the less experienced customer, we have made a line of multipurpose drivers, represented by each size, from 4” mid-woofers through 15” subwoofers, enabling you to approach a project, the more conventional way. It is also possible to use one of the standard drivers as a raw model, and getting parameters changed in the direction you wish.


C-Quenze - our newest line of Loudspeaker Drivers.

C-Quenze drivers are based on the same technology as the Flexunits,

but use a solid die cast basket instead of the modular basket used

in Flexunits. This precludes customized basket dimensions – only our new

C-Quenze cones or cones with a similar height can be used.

The best part of energy during development was put into refinement of the performance in the midrange area. All the materials used, were picked to obtain the trustworthiest midrange reproduction. The drivers are extremely fast and move without any dynamic compression due to the mechanical construction.

For OEM customers, we are still able to make adjustments regarding the T/S parameters as well as the physical parameters – FX. Voice coil winding height, magnetic gap height and magnet sizes.

The features such as: SD system, Kapton voice coil former and under hung motor structure are still available in the C-Quenze drivers. Hexacoil voice coil winding technique is used.

The high ventilation factor through the centre pole piece, under the rear suspension and the perforation to the voice coil, are naturally kept intact, enabling the moving system to accelerate without any compression.

Frequency response curves in the C-Quenze drivers have been improved, compared to the Flexunits.

More

AudiotechnologyThere are 10 products.

Subcategories

  • Audiotechnology FLEXUNITS

    Audiotechnology FlexUnits - The Original Idea  

    The FlexUnit system was developed to fulfil individual needs as desired. This service is available.

    Features - FlexUnits

        Die cast aluminium chassis.
        Gold plated input connectors.
        Ventilation under the rear suspension.
        Voice coil gap ventilation.
        Maximum rear ventilation for minimum compression.
        Compressed lightweight aluminium voice coil, wound in hexagonal technique.


    Driver Codes example
    4 H 52 06 13 SD
        
    4 -Emmisive cone size
    H -Magnet size
    52 - Voice coil diameter
    06 - Voice coil length
    13 - height of magnet cap

    SD = Symmetric drive
    K  = Kapton®
    KA = Kapton® Aluminium combination
    P  = Sandwich Cone
    M  = Midrange surround


    FlexUnits - The Original Idea  
    The FlexUnit system was developed to fulfil individual needs as desired. This service is available.

  • Audiotechnology C-Quenze drivers

    C-Quenze - our newest line of Loudspeaker Drivers.

     

    C-Quenze drivers are based on the same technology as the Flexunits,

    but use a solid die cast basket instead of the modular basket used

    in Flexunits. This precludes customized basket dimensions – only our new

    C-Quenze cones or cones with a similar height can be used.

    The best part of energy during development was put into refinement of the performance in the midrange area. All the materials used, were picked to obtain the trustworthiest midrange reproduction. The drivers are extremely fast and move without any dynamic compression due to the mechanical construction.

    For OEM customers, we are still able to make adjustments regarding the T/S parameters as well as the physical parameters – FX. Voice coil winding height, magnetic gap height and magnet sizes.

    The features such as: SD system, Kapton voice coil former and under hung motor structure are still available in the C-Quenze drivers. Hexacoil voice coil winding technique is used.

    The high ventilation factor through the centre pole piece, under the rear suspension and the perforation to the voice coil, are naturally kept intact, enabling the moving system to accelerate without any compression.

    Frequency response curves in the C-Quenze drivers have been improved, compared to the Flexunits.

    Codes:

    15 H 52 15 06

    15 - Nominal driver size in Centimeters

         H - Magnet code (H = 120x20mm)

           52 - Voice coil diameter (mm)

                 15 - Winding height of voice coil

                     06 - Magnetic gap height

     

    Additional codes:

    SD = Symmetric drive

    K = Kapton voice coil former

    KA = Combination of Kapton and Aluminum

    P = Sandwich Cone

    M = Midrange surround

     

Showing 1 - 10 of 10 items
Showing 1 - 10 of 10 items

New products

Specials