SB AcousticsThere are 165 products.

Subcategories

• 

  SB Acoustic Tweeters

  SB Acoustics Tweeters  features a proprietary fabric ring dome with a large roll surround. Stabilizing the center of the dome greatly reduces distortion and brings the acoustic center of the tweeter back to the voice coil, with the added benefit of increased sensitivity. The tweeter has a chambered back designed to provide a lower resonance frequency and reduce back wave reflections from the dome. A copper cap is used on the pole piece. Large surface area.

• 

  SB Acoustics Wideband

  SB Acoustics 2.5" full range speaker with 64mm square polymer chassis, aluminum cone with resonance reducing indentations and low damping surround. This speaker is getting out beyond 20,000Hz with a rising response. That rise is thought to be beneficial to listeners whose hearing is rolling off in the upper frequencies. In a half to one liter sealed box this speaker should get down to about 140Hz. This speaker has many uses in sound bars, electronics, computer speakers, medical equipment, etc.

• 

  SB Acoustics Midrange

  SB Acoustics  Midrange Woofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency foam surround. Fitted with a proprietary composition paper cone, 1" voice coil. Very open cast frame for minimal reflections. Fs 61Hz, good level extended response up to 5KHz.

• 

  SB Acoustics Midwoofer

  SB Acoustics  Midwoofer is an excellent well known SB Acoustics Ferrite magnet 5" 8 ohm mid woofer, featuring a high efficiency low damping rubber surround. Used by several OEM manufacturers. Fitted with a proprietary composition coated paper cone, 1.2" voice coil. Very open cast frame for minimal reflections. Extended copper clad pole piece for lower distortion. Fs 41Hz, good level midrange response, a very flexible unit.

• 

  SB Acoustics Woofers

  SB Acoustics woofer (aluminum cone woofer, 8 ohm impedance) cone was formed with geometric features to reduce resonance and improve rigidity. The woofer has a rigid cast frame with ventilated spider and large vented pole piece. A low damping rubber surround assures decent midrange reproduction. A shorting ring is used in the motor to reduce intermodulation distortion and improve inductance symmetry.

• 

  SB Acoustics Subwoofer

  SB Acoustics  Subwoofer is an unusual shallow profile 8-15" subwoofer. Dual rigid aluminum cone structure and non-conducting fiber glass coil former for minimum damping. Shorting ring in motor system for reduced distortion.

• 

  SB Acoustics Passive radiators

  SB Acoustics Passive radiators have the hard paper cone for improved piston operation (made in-house). Cast aluminium chassis for optimum strength. Low damping medium hardness rubber surround for improved dynamic linearity and mechanical stability. Easily adjustable moving mass.