H1147-06
New
Tweeter Seas Prestige H1147-06 27TBC/G
Warning: Last items in stock!
Availability date:
Tweeter Seas Prestige H1147-06 27TBC/G
27TBC/G is a High Definition metal dome tweeter with a wide, soft polymer surround and a rear chamber.
Aluminium/magnesium alloy diaphragm with pistonic behaviour throughout the audible frequency range, resulting in a good dispersion also above 10kHz.
A Hexagrid protects the diaphragm, and supports a phase plate which compensates for a slight axial roll off towards 20 kHz.
Sonomax surround for low resonance, excellent mechanical linearity and stability without magnetic fluid damping.
The voice coil is wound on an aluminium voice coil former with adequate ventilating holes to eliminate noise from internal air flow.
The stiff and stable rear chamber with optimal acoustic damping allows the tweeter to be used with moderately low crossover frequencies.
The chassis is precision moulded from glass fibre reinforced plastic, and its front design offers optimum radiation conditions.
Nominal Impedance | 6 Ohms |
Recommended Frequency Range | 2000 - 25000 Hz |
Short Term Power Handling * | 150 W |
Long Term Power Handling * | 55 W |
Characteristic Sensitivity (2.83V, lm) | 92 dB |
Voice Coil Diameter | 26 mm |
Voice Coil Height | 1.5 mm |
Air Gap Height | 2.0 mm |
Linear Coil Travel (p-p) | 0.5 mm |
Voice Coil Resistance | 4.8 Ohms |
Voice Coil Inductance | 0.05 mH |
Force Factor | 3.5 N/A |
Free Air Resonance | 600 Hz |
Moving Mass | 0.33 g |
Effective Piston Area | 7.0 cm2 |
Magnetic Gap Flux Density | 1.8 T |
Magnet Weight | 0.25 kg |
Total Weight | 0.52 kg |
*IEC 268-5, via High Pass Butterworth Filter 2500Hz 12 dB/oct. SEAS reserves the right to change technical data
No customer reviews for the moment.