miniDSP-2x4-kit
New
MiniDSP 2x4 kit, our low cost audio processing board for DIY audio applications. Great sound in a 3" package.
Warning: Last items in stock!
Availability date:
MiniDSP 2x4 kit, our low cost audio processing board for DIY audio applications. Great sound in a 3" package.
Highlights
Product detail
MiniDSP 2x4 kit
Tip: Take a look at the table in this blogpost to see which power supply to choose for this product.
The original miniDSP kit that started our story! A low cost, low power and great sounding module optimized for DIY/System tuning project. With our “one platform, many configuration” concept, MiniDSP gives great flexibility to engineers, A/V designers and DIYers at a fraction of the cost of typical alternatives to tune their audio system. May it be a multi-way digital crossover, tuning your subwoofer room and simple room correction, it's up to your imagination.
The miniDSP 2x4 kit is a low cost audio processing module featuring Digital Signal Processing (DSP) and onboard DAC/ADC. Fitting between your source and your amplifier, this pocket size module packs all the filter tools you need to get started with tuning your 2way, 4way, subwoofer.
At the core of the miniDSP 2x4 kit solution is the combination of intelligent onboard firmware combined with our flexible software plug-in. At miniDSP, we believe in making DSP programming easy thanks to our intuitive Graphic User Interface (GUI). May it be a PC or Mac, the first step will involve programming the device over the driverless USB 2.0 port. Using the onboard Digital Signal Processor (DSP), one can configure the onboard parametric/graphic equalizers (PEQ), crossovers, levels and time alignment and hear live changes. Flash the onboard memory and you can disconnect your PC/Laptop as the configuration is now saved in the internal flash memory forever.
Finally, our “one platform, many configuration” concept gives great flexibility to engineers, A/V designers and DIYers at a fraction of the cost of typical alternatives to tune their audio system. May it be a multi-way digital crossover, tuning your subwoofer room and simple room correction, it's up to your imagination.
Mechanical Specifications
PRODUCT SPECIFICATIONS | |
Digital Signal Processor Engine | 28/56 bit Digital Signal Processor Engine / Double precision processing |
Sample rate | 48kHz |
ADC/DAC Data resolution | 24 bits |
Analog Audio Input | Unbalanced input, gold plated RCA terminated |
Maximum input level | 0.9Vrms / 2Vrms selectable by jumper configuration |
Dynamic range, un-weighted | >98dB |
Input Impedance | 0.9Vrms position = 9kOhms / 2Vrms position = 20k Ohms |
Analog Audio Output | Unbalanced input, gold plated RCA terminated |
Maximum level, unbalanced | 0.9Vrms (2.5Vpp) |
Dynamic range, un-weighted | >98dB |
Output Impedance | 560ohms |
Expansion connector signals | 2ch x I2S in/ 4ch x I2S out / Analog INx2 / Analog Out x 4/ 3pin connector for volume control on 10k linear potentiometer 5pin USB header for panel mount USB connector |
Power supply | USB powered and/or 4.5~24Vdc input via header (150mA @ 5V) 2.1mm round DC plug |
Dimensions (H x W x D) | 75mm x 75mm |
No customer reviews for the moment.