AudioQuest Husky XLR 72v DBS 5m Subwoofer Cable

AudioQuest Husky Subwoofer Cable

This strikingly beautiful breed has a delightful temperament combined with keen intelligence and equally acute independence of spirit. While Huskies are rarely the best choice for watchdog functions (because of their overwhelming instinct to run at any and every opportunity), Huskies have an ability to learn that has been described as “staggering.” The Husky’s natural instincts have evolved from its historical origins as sled dogs for nomadic Siberian tribes to become loving and playful family dogs. DNA analysis has found that the Husky is one of the world’s oldest dog breeds.

Features :

• Solid 5% Silver Conductors
• Polyethylene Air-Tube Insulation
• Dielectric-Bias System (DBS, US Pat #s 7,126,055 & 7,872,195 B1)
• Carbon-Based 4-Layer Noise-Dissipation System (NDS)
• Triple-Balanced Geometry
• Cold-Welded Hanging-Silver Directly Over Pure "Red-Copper" Plugs
• Grounding

Please note: The Huskey subwoofer cables in 1 RCA to 1 RCA 3m length are available for immediate shipment. All other lengths and plug configurations are special order items and are subject to shipping within 7 to 10 working days. 

Solid 5% Silver Conductors :

Strand interaction is the single greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors avoid many strand-interaction distortion mechanisms. Solid-core conductors offer a complete and compelling solution to this problem.

Conductor metal quality is critical for the best cable performance. The conductor surface is the only area of the conductor with 100% current density at all frequencies. The smoothness of the conductor surface is imperative because the surface is a guide rail for the entire energy envelope. The best copper and silver conductor metals have fewer grain boundaries and low oxygen content for low distortion and high performance.

Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality subwoofer cables.

Polyethylene Air-Tube Insulation :

Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a "dielectric" because it is inside the conductor's magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.

All of Husky’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.

Dielectric-Bias System (DBS, US Pat #s 7,126,055 & 7,872,195 B1) :

All insulation slows down the signal on the conductor inside. When insulation is unbiased, it slows down parts of the signal differently, a big problem for very time-sensitive multi-octave audio. AudioQuest’s DBS creates a strong, stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays that occur. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS battery packs will last for years. A test button and LED allow for the occasional battery check.

Husky utilises the Black 72V DBS, which adds an essential Noise-Dissipation filtering device and RFI filter, thereby greatly enhancing performance.

Carbon-Based 4-Layer Noise-Dissipation System (NDS) :

100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.

Husky ultilises the Carbon-Based 4-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.

Triple-Balanced Geometry :

Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.

The three conductors in “Triple-Balanced” Husky cables ensure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low-distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.

Cold-Welded Hanging-Silver Directly Over Pure "Red-Copper" Plugs :

AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable. 

To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.

AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Red-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers' plugs.

This plug design enables a perfect heat-free connection between cable and plug. The connection between the plug and conductors is made using AQ’s Cold-Welded System, which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Welded System refers to a combination of high pressure at the point of contact and the use of copper- or silver-impregnated paste. (Husky’s silver conductors get silver paste.) XLR plugs are also available.

Grounding :

Sometimes there is a hum problem unless the subwoofer and AV receiver (or surround-sound processor) are attached to each other using a separate wire. If your system has a hum problem, try attaching the little spade-lug tails to the metal chassis of the subwoofer amplifier and to the chassis of the sending component. Usually, this extra wire will not be needed.

Specification :

• Metal: Solid 5% Silver
• Geometry: Triple-Balanced
• Dielectric: Polyethylene Air-Tubes
• Noise-Dissipation System: Carbon-Based 4-Layer Noise-Dissipation System
• Termination: Cold-Welded, Hanging-Silver directly over pure Red Copper in RCA or XLR
• Jacket Colour: Black/Blue Braid

About AudioQuest

AudioQuest aims to deliver the most beautiful, durable, and reliable audio/video cables and accessories on the planet, products that don’t only represent the absolute highest value but also exceed any expectations regarding performance. AudioQuest is a premier provider of high-performance audio video cables and accessories sold in hundreds of outlets in the USA, Europe and in over sixty countries. AudioQuest’s products represent both extraordinary value and exceptional performance.