SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4
search
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4

SB17MFC35-4
58.00 € Без НДС
71.92 € с НДС для покупателей из ЕС

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4

Количество
В наличии

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-4

Special Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Mineral filled PP-cone made in-house
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specifications:

Nominal Impedance 4 Ω Free air resonance, Fs 30 Hz
DC resistance, Re 3.1 Ω Sensitivity (2.83 V / 1 m) 90 dB
Voice coil inductance, Le 0.13 mH Mechanical Q-factor, Qms 5.2
Effective piston area, Sd 118 cm2 Electrical Q-factor, Qes 0.30
Voice coil diameter 35.5 mm Total Q-factor, Qts 0.28
Voice coil height 16 mm Moving mass incl.air, Mms 12.3 g
Air gap height 5 mm Force factor, Bl 4.9 Tm
Linear coil travel (p-p) 11 mm Equivalent volume, Vas 45 liters
Magnetic flux density 1.0 T Compliance, Cms 2.29 mm/N
Magnet weight 0.54 kg Mechanical loss, Rms 0.45 kg/s
Net weight 1.55 kg Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB17MFC35-4
Комментарии (0)
Еще нет отзывов.