audiohobby

Manufacturer

Price

0 € - 4635 €

Динамики

Информация

COVID-19 Update

ДинамикиТоваров: 524.

Подкатегории

  • Динамики ВЧ

    A tweeter or treble speaker is a special type of loudspeaker (usually dome or horn-type) that is designed to produce high audio frequencies, typically from around 2,000 Hz to 20,000 Hz (generally considered to be the upper limit of human hearing). Specialty tweeters can deliver high frequencies up to 100 kHz. The name is derived from the high pitched sounds made by some birds, especially in contrast to the low woofs made by many dogs, after which low-frequency drivers are named (woofers).

  • Среднечастотные динамики
  • Динамки широкополосные
  • Coaxial Drivers
  • СЧ-НЧ Динамики

    A mid-woofer (also know as a midbass) is any speaker that is capable of playing both midrange and midbass frequencies at thesame time. The mid-woofer is usually used in a comp onent speaker system consisting of the woofer, tweeter, and passive crossover. In a 2-way component system, a typical mid-woofer is usually responsible at least six octaves, ranging from 80Hz to 2.5kHz and sometimes higher. In a 3-way component system, a mid-woofer usually is used as a dedicated mid-bass and responsible for a general range between 80Hz and 250Hz, while some still go as high as 1000Hz (usually when a smaller midrange is used).

  • НЧ Динамики
  • Passive Radiators
  • Subwoofers
  • Car Audio drivers
  • Scan-Speak Discovery

    Scan-Speak Discovery series is new to the loudspeaker market, but its defining characteristics are well known: superior sound, a solid construction, and a wide range of variants. Combining these three elements - plus a wealth of technical features and finesses - gives our customers the possibility of acquiring a tailor-made Scan-Speak solution at a lower price point compared to our other product lines.

    Woofers
    Examine the wide range of midwoofers, woofers and subwoofers, and discover the benefits of superb mid- and low frequency performance. Ranging in size from 15 - 30cm, they meet several ambitions and goals, such as a linear frequency response and high sensitivity.

    With black coated fibreglass cones and rubber surround, they are built for performance. Venting the aluminium baskets below the spider reduces compression, providing an improved sound. Note that all sizes are available in both 4 and 8 ohm variants. The 25 and 32mm voice coil (15 & 18cm) and 38 and 50mm voice coil (22, 26 & 30cm) variants ensure adequate motor power and power handling.

    Midranges & Full range
    Both dome and cone versions are available in the midrange section of the new series. The D7608/9200 dome midrange has been known for its superior performance for decades. It features a wide dispersion, high output (92dB @ 1W) and natural clean and undistorted sound as well as compact mounting dimensions.

    Within midrange products, you'll find the 10F cone full range unit. It is excellent for midrange reproduction, due to its compact and very powerful neodymium motor along with the black coated fibreglass cone and rubber surround. It tops out by producing 90dB @ 2.83V, an exceptionally high sensitivity for such a small driver. The aluminium basket contributes to the robustness of the design. The sound quality offered by this driver is a leader in the market.

    You can also count on the 15M cone midrange to be there when and where you need it. With a 25mm voice coil and ferrite magnet system, it provides high sensitivity. With special attention being paid to the diaphragm and surround as differentiating parts of the product, it provides excellent midrange reproduction, complementing the woofers and midwoofers of the Discovery line.

    Tweeters
    Whether you prefer dome or ring dome tweeters, Discovery has your needs covered. The D2606/922000 tweeter makes its strong presence felt thanks to a 25mm dome, ferrofluid and a rear chamber.

    Expanding to include both dome and ring dome versions, the D2604/R2604 wide surround ensure that performance is impressive here as well, offering a lower cost alternative to the Scan-Speak Revelator tweeters. Add the very wide dispersion of the DX variant, along with the very low distortion of the XT variant, and some timeless units are born.

    The D2608/913000 also contributes exceptionally well thanks to the built-in high sensitivity and rear chamber. This driver has been designed as a very price competitive alternative to our Scan-Speak 1" classic tweeters.

  • Scan-Speak Classic

    Scan-Speak Classic line consists of all the highly-regarded drivers that have been praised and loved by so many customers over the years. This family consists of a collection of star products developed over the years. They are speakers that fully live up to the heritage of the Scan-Speak brand. The longevity and strength of these designs has been proven through decades of sales and manufacturing.
    The Symmetric Drive (SD) concept with copper in the magnet system was invented by Scan-Speak . The first version of the SD system was patented in 1972. High-quality magnet system design has thus been a key feature of Scan-Speak design since the company's inception.

    Several of the Classic line speakers have been attempted to be copied by others. But the same quality and the same success as the original Scan-Speak design has never been duplicated.

    The Classic series consists of speakers from 3/4" tweeters and all the way up to 10" woofers.

    The D2008 and D2010 ¾" tweeters are among the highly praised designs in Classic. They have enjoyed success for more than 35 years.

    The D2905/9000 tweeter kick-started a new era with a line of very high quality 1" tweeters, later in a known series of 9300, 9500 and 9700.

    The 13M midrange is a unique midrange, famous for utilising a dust cap made of a tweeter textile dome.

    The Classic 18W and 21W designs are also highly praised, and are used in some of the most exceptional high-end products. Some feature Kevlar cones; others have the innovative Carbon fibre paper cones, aside from their availability in classic hard paper and polypropylene.

    The woofers - 18W and especially 21W and 25W - are known for a relatively shallow design, suitable where not much depth is available behind the drivers.

    These designs all represent the heritage of Scan-Speak. They are products designed right from the beginning, and have proven to be long-term successes in the market. They were designed by excellent engineers, based on craftsmanship and technological excellence, and combined with an audiophile approach, where all designs are evaluated by the human ear.

  • Scan-Speak Revelator

    Scan-Speak Revelator family of drivers - tweeters, midwoofers, and subwoofers - has represented the Scan-Speak’s top-of-the-line collection for nearly two decades. It has consistently provided the best sounding products that money can buy.

    The most recent generation of Revelator tweeters was introduced just a few years ago. The large roll surround technology represented a breakthrough in overall performance, with outstanding off-axis response, high output capability and low resonance frequency. Additional enhancements have been made to reduce distortion and power compression, such as large neodymium magnet systems for high sensitivity, and a careful design to optimise airflow in the chambers.

    The new tweeter series consists of a popular dome design, which has since been attempted to be copied by other loudspeaker manufacturers. But no one has ever been as successful as the original Scan Speak design! The Revelator tweeter series also consists of the revolutionary ring radiator design, which put an end to some of the design trade-offs in dome designs. The ring radiator still offers unrivalled performance.

    The Revelator series of midwoofers was introduced just before the the tweeters. The sliced paper cone technology represented a breakthrough in midrange clarity and overall smooth frequency response characteristics. The slices are filled with damping glue, which dramatically reduce break-up modes in the diaphragm.

    The design of the Revelator sliced diaphragm has also been attempted to be copied. The lack of an application of damping to other designs keeps the copycats from providing a quality driver.

    The Revelator series of woofers and subwoofers is the most recent addition to the series. Generally, it series provides much more cone excursion than previously available, a much more powerful magnet system, and 2" voice coils with high power handling.

    Among other features, the subwoofer design utilises a strong and stiff aluminium cone design, resulting in an impressive transient response. The output is exceptionally true-to-life, with an earthshaking bass that challenges the listener to tell the difference between the real thing and its reproduction.

  • Scan-Speak Illuminator

    Design know-how reaches new levels of sound performance in Illuminator products. Powerful neodymium motors with under-hung voice coil configuration serve as uniting design elements. They provide large linear excursion capability. What’s more, an extensive use of SD (symmetric drive) copper caps ensures the lowest possible distortion throughout the excursion range of the speaker.

    The Illuminator tweeters are built on the heritage of the renowned Revelator D29 and R29. The compact size is one of the key elements of the Illuminator tweeter design. This small size is employed without compromising sound quality, either.

    The compact design also provides a high degree of flexibility within design options for our customers. The sound quality of these tweeters is fully comparable to the renowned Revelator designs, no matter if the music is played at high or low listening levels.

    The Illuminator midrange and woofers are based on compact under-hung motor systems with large neodymium ring magnets. The patent-pending motor offers a very long linear excursion, along with a very high force factor. The top plate is shaped to guide the backside airflow around the motor. Finally, the open cast aluminium chassis design of the driver is virtually free from compression.

    During the design phase, extreme care and attention has been put into providing midrange clarity beyond anything previously available on the market. It takes place independent of power input, and even at very high excursions.

    The cone is designed for maximum stiffness and damping. The midwoofers also feature a constrained layer paper cone design. The stiff and robust cone handles high power with ease. This assures that details transferred through the motor system are converted into undistorted sound. Transparency, details and precision at any input power are key words when describing the sound quality of the Illuminator designs.

    Regarding the midrange units, a focus on maximum transparency, details, and precision gave birth to a new one-piece paper cone design with integrated dust cap and a coated foam surround. Careful design of the cone, its shape, and attachment to the voice coil means that this transducer provides the best midrange sound quality available on the market.

  • Seas Prestige

    SEAS Prestige cone and dome drive units are available in a large array of sizes and diaphragm materials, to perfectly fit the exacting requirements of both the OEM and distribution markets. Each product is designed to offer the industry’s best combination of quality, performance and value. Built upon a foundation of over half a century of engineering and manufacturing expertise, SEAS Prestige products truly demonstrate our dedication to The Art of Sound Perfection.

  • Seas Excel

    SEAS Excel drive units have been designed for the discerning listener who will accept nothing less than the very best. SEAS Excel drive units challenge the state of the art; combining world-class engineering with advanced materials and precise manufacturing techniques.

  • Seas Exotic

    Seas Exotic is combining more than 60 years of Seas experience with the newest technology available.

    These drivers are addressing the market that requires ultra high end, high efficiency transducers.

    All drivers are carefully measured and approved by the SEAS Quality Control people, before we ship them out from Moss in Norway.
    Ease. Air. Clarity. The effortless SEAS Exotic sound.

  • Seas Lotus

    Welcome to SEAS Lotus Mobile Audio.


    The ultimate mobile experience.

    For more than 50 years, we have been developing and manufacturing High End Lodspeaker drivers in Moss, Norway.
    All this experience urged us to extend our product line with Mobile Audio Products.
    Built on our world renown Excel technology, we have developed some of the finest high end quality loudspeakers available in today’s marketplace.

    The product range consists of 2 different complete Lotus sets, Performance and Reference. These include 2 pcs tweeters, 2 pcs 17 cm woofers, crossovers, and cables.

  • Design by SEAS

    Design products are engineered and quality tested in Moss, Norway.

    The product range consists of 2 subwoofers and one passive radiator.

  • SB Acoustics
  • SB Acoustics Tweeters
  • SB Acoustics Midrange

    SB Acoustics  Midrange Woofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency foam surround. Fitted with a proprietary composition paper cone, 1" voice coil. Very open cast frame for minimal reflections. Fs 61Hz, good level extended response up to 5KHz

  • SB Acoustics Midwoofer
  • SB Acoustics Woofers
  • SB Acoustics Passive radiators



  • SB Acoustics Subwoofer
  • SB Acoustics Satori
  • Accuton
  • Audiotechnology

    Audiotechnology:

    Flex Units Loudspeaker Drivers

    The Flexunits system was developed to fulfill individual data as desired, and we are able to meet even the most specific individual requirements – mechanical as well as electrical.

    Fs, Vas and Qts can all be modified and the coil former can be made of either aluminium or Kapton. In special cases the cone material and suspensions can also be changed.

    Gap height and coil length as well as diameter can be selected individually and the magnet size can be altered to fit the needed strength required.

    For the less experienced customer, we have made a line of multipurpose drivers, represented by each size, from 4” mid-woofers through 15” subwoofers, enabling you to approach a project, the more conventional way. It is also possible to use one of the standard drivers as a raw model, and getting parameters changed in the direction you wish.


    C-Quenze - our newest line of Loudspeaker Drivers.

    C-Quenze drivers are based on the same technology as the Flexunits,

    but use a solid die cast basket instead of the modular basket used

    in Flexunits. This precludes customized basket dimensions – only our new

    C-Quenze cones or cones with a similar height can be used.

    The best part of energy during development was put into refinement of the performance in the midrange area. All the materials used, were picked to obtain the trustworthiest midrange reproduction. The drivers are extremely fast and move without any dynamic compression due to the mechanical construction.

    For OEM customers, we are still able to make adjustments regarding the T/S parameters as well as the physical parameters – FX. Voice coil winding height, magnetic gap height and magnet sizes.

    The features such as: SD system, Kapton voice coil former and under hung motor structure are still available in the C-Quenze drivers. Hexacoil voice coil winding technique is used.

    The high ventilation factor through the centre pole piece, under the rear suspension and the perforation to the voice coil, are naturally kept intact, enabling the moving system to accelerate without any compression.

    Frequency response curves in the C-Quenze drivers have been improved, compared to the Flexunits.

  • Динамики ВЧ Mundorf Hi-Fi AMT U Series"

    Our goal: A ‚reduced to the maximum‘ model range of AMT tweeters which cover all possible applications in home- and studio-audio. The development engineers therefore had the task of keeping the design as simple, straightforward and versatile as possible without compromising the central AMT element -the diaphragm- which determines the tweeter‘s final sound quality. Rather, this should be further optimized based on the experience and knowledge gained from more than 15 years of our diaphragm development.

  • Speaker driver accessories

    Speaker drivers accessories  - screws, gaskets, grilles, etc

  • Monitor Audio
на странице
Показано 1 - 12 из 524 товаров
Показано 1 - 12 из 524 товаров

Новые товары

Скидки