






Катушки индуктивности
Подкатегории
-
Mundorf M-Coil
Воздушные катушки индуктивности изготовлены из массивного кругового медного провода и специально разработаны для высококачественных громкоговорителей, которые ориентированы на произведение максимально естественного, детального и акустически сбалансированного звука. Акустические свойства L-серии могут быть значительно улучшены путем приминения вакуумной пропитки проводов. Катушки с вакуумной пропиткой объеденены в отдельной производственной серии типа VL.
Технические характеристики:
OFC-медь 99.99% чистоты
Корпус катушки: типа PA, укреплённый стекловолокном
Термостойкость до 230 ° С / 446 ° F -
Mundorf M-Coil BV
-
Mundorf M-Coil VL
Воздушные катушки индуктивности изготовлены из массивного кругового медного провода и специально разработаны для высококачественных громкоговорителей, которые ориентированы на произведение максимально естественного, детального и акустически сбалансированного звука. Акустические свойства L-серии могут быть значительно улучшены путем приминения вакуумной пропитки проводов. Катушки с вакуумной пропиткой объеденены в отдельной производственной серии типа VL.
Технические характеристики:
OFC-медь 99.99% чистоты
Корпус катушки: типа PA, укреплённый стекловолокном
Термостойкость до 230 ° С / 446 ° F -
Mundorf MCoil VNCU ZeroOhm (resin-soaked)
Mundorf MCoil VNCU ZeroOhm (resin-soaked)
-
Mundorf M-Coil LL Hepta Strand
MCoil Hepta Strand coils unite the tonal clarity. beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils. alongside the harmonious-warmth and splendid brightness of strand copper wire.
They are therefore the first choice for high quality high and mid frequency applications which focus on a finely detailed. utmost refined musical fidelity performed within a truly holographic life-like staging. -
Mundorf M-Coil CF
-
Mundorf M-Coil transformer-core
-
Mundorf M-Coil CF transformer-core
-
Mundorf M-Coil BV transformer-core
-
MCoil VT transformer-core vacuum impregnated
-
Mundorf M-Coil CF i-core
-
Mundorf M-Coil BV i-core
-
Mundorf M-Coil drum-core
Ферритовые катушки
Катушка индуктивности с барабанным сердечникомС нашим высокомощным ферритовым материалом HP 3616, мы идём на встречу пожеланиям многих пользователей о недорогом и одновременно высокоёмкостном сердечниковом материале. Механические достоинства такой относительно маленькой катушки очевидны. Однако только из-за нового материала HP 3616, учитывая все его качественные особенности, было решено использовать ферритовый сердечник в нашей производственной линии. Этот изготовленный в Германии материал чётко отличается своей высокой предельно допустимой нагрузкой от других многократно применяемых дешёвых сердечников. Серия HР объединяет выгодные электромеханические показатели с относительно малой поштучной стоимостью.
Teхнические характеристики:
Сердечниковый материал: HP 3616
OFC-медь: 99.99% чистоты -
Mundorf M-Coil drum-core BV
Ферритовые катушки
Катушка индуктивности с барабанным сердечником и термообработкой
С нашим высокомощным ферритовым материалом HP 3616, мы идём на встречу пожеланиям многих пользователей о недорогом и одновременно высокоёмкостном сердечниковом материале. Механические достоинства такой относительно маленькой катушки очевидны. Однако только из-за нового материала HP 3616, учитывая все его качественные особенности, мы решили использовать ферритовый сердечник в нашей производственной линии. Этот изготовленный в Германии материал чётко отличается своей высокой предельно допустимой нагрузкой от других многократно применяемых дешёвых сердечников. Серия HР объединяет выгодные электромеханические показатели с относительно малой поштучной стоимостью.
Teхнические характеристики:
Сердечниковый материал: HP 3616
OFC-медь: 99.99% чистоты
Лаковая пропитка и термообработка -
Mundorf M-Coil pin-core
-
Mundorf M-Coil rod-core
Аронитовые катушки
Катушка индуктивности со стержневым сердечником
Aронит - это материал на основе агломерированного материала, который даже при очень высоких нагрузках обнаруживает минимальные искажения. Этот материал, в сочетании со специальным корпусом, делает возможным создание катушки с предельно малым омическим сопротивлением и превосходным соотношением цены и качества.
Aронитовые дросселя находят всестороннее применение там, где нужно сочетать высокую предельно допустимую нагрузку, малые искажения и приемлемую цену.
Технические характеристики:
Cердечниковый материал: Аронит
OFC-медь: 99.99% чистоты
Корпус катушки: типа PA, укреплённый стекловолокном -
Mundorf M-Coil BV rod-core
-
Mundorf M-Coil CF rod-core
-
Mundorf M-Coil zero-ohm
-
Mundorf M-Coil CF silver
-
Mundorf M-Coil silver/gold
-
Jantzen Air Cored Wire Coil
High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications.
Modern self-supporting design, low tolerance (+/-3%) and power handling dependent on the wire used, makes it the most versatile coil on the market.
About baked wire used for Jantzen Induction coils:
Description: Enamellled copper wire solderable with self-bonding topcoat, class 155, acc to IEC 60317-35, DIN EN 60317-3Production range: Grade 1B 0.30 0.40 0.50 0.63 0.70 0.80 1.00 1.20 1.40 1.60 1.80 mmInsulation: Polyurethane with aliphatic polyamide bondcoatFeatures: Temperature index of 155, solderability at 390°C without removing the enamel coating, bonded under action of heatApplications: Used for self supporting coils, windings for deflection yokes, watchmaking, loudspeaker coils, small motorsTypical values for FLS 155 dia 1,00 mm Grade 1B, testing according to IEC 60851.1...6Mechanical properties:Flexibility: 10% 1 dElongation: ³30 %Thermal properties:Temperature index: 155Cut through: ³ 200°CHeat shock at 175°C: 1xdBonding temperature: 170-200°CResoftening temperature: 155°CElectrical properties:Breakdown voltage: > 1,5 IECTangent delta /TD 300/: ³ 140Chemical properties:Solderability at 390°C: 8 s -
Катушки Jantzen Wax Coil
This product has been revived through cooperation with our audio partners.
The insulation used for Wax Coils is a special 60 μm quality paper. The coil is wound with the same 99,99% pure copper foil, also used for Cross Coils. Each coil is impregnated with a polymolecular paraffin Wax, making the coil hard as a rock! Each coil is tested with Clio system.
Tolerance +/-2%
Wax Coils are available in the following sizes:
16AWG - 1,33 mm2 , coil height 24 mm
14 AWG - 2.10 mm2, coil height 36 mm
12 AWG - 3,29 mm2, coil height 54 mm
8 AWG – 8,46mm, coil height 54mm
Wax Coil 16 AWG sustains 350 Watts RMS
Wax Coil 14 AWG sustains 500 Watts RMS
Wax Coil 12 AWG sustains 650 Watts RMS -
Jantzen Iron Cored Coils With Discs
High-purity copper wire wound around a Permite core (or core + discs), for a high inductance at the lowest cost.
Extremely low DCR which does not alter driver damping factor and loss of efficiency.
The Permite material provides significant lower hysteresis compared to coils with ferrite cores, at the same time delivering higher power handling than the ferrite ones.
Recommended for bass section only.
Power handling 400 watts RMS.
About baked wire used for Jantzen Induction coils:
Description: Enamellled copper wire solderable with self-bonding topcoat, class 155, acc to IEC 60317-35, DIN EN 60317-3Production range: Grade 1B 0.30 0.40 0.50 0.63 0.70 0.80 1.00 1.20 1.40 1.60 1.80 mmInsulation: Polyurethane with aliphatic polyamide bondcoatFeatures: Temperature index of 155, solderability at 390°C without removing the enamel coating, bonded under action of heatApplications: Used for self supporting coils, windings for deflection yokes, watchmaking, loudspeaker coils, small motorsTypical values for FLS 155 dia 1,00 mm Grade 1B, testing according to IEC 60851.1...6Mechanical properties:Flexibility: 10% 1 dElongation: ³30 %Thermal properties:Temperature index: 155Cut through: ³ 200°CHeat shock at 175°C: 1xdBonding temperature: 170-200°CResoftening temperature: 155°CElectrical properties:Breakdown voltage: > 1,5 IECTangent delta /TD 300/: ³ 140Chemical properties:Solderability at 390°C: 8 s -
Jantzen C-Coil - Toroidal Core
C-Coil is wound around a sandwich core, and it has extremely low resistance and can shift a large amount of power without getting over heated.
The core is formed like a donut with a round cross section, and it is wound from one long piece of laminated steel tape.
The surface of the core is epoxy coated to secure against short circuit even at a very high load.We have tested the inductor with a carrying load of 1000 Watt, and it lasted and stood up well.
It can stand upto 700 Watt per 48 hrs in one go.We are very satisfied with the result.
The C-Coil is designed for Bass, Sub-Woofer and Amplifiers, in different core and wire sizes.Please note!
The C-Coil cannot be measured using a universal LC meter. Due to the characteristics of the core and winding method, it is important to use a professional RLC meter. We measure all C-Coils before shipping them using a professional RCL meter at AC 1 V 1 kHz.
-
Катушки Jantzen Audio Cross Coil
The Cross Coil has been developed in cooperation with Audio Technology, Denmark, producing high-end drivers for the world market.
No chain is stronger than its weakest link. This is especially so when we speak of loudspeakers, where there is often a cost reduction for crossover inductors. The result is distortion and power loss.
High-end loudspeaker producers overcome this problem by using foil coils, where the copper is flat instead of round.
Cross Coils are available in 12, 14 and 16 AWG.
On special request we can also offer Cross Coils in 8 AWG
-
Jantzen Audio Iron Coil
High-purity copper wire wound around a Permite core, for a high inductance at the lowest cost.
Extremely low DCR which does not alter driver damping factor and loss of efficiency.
The Permite material provides significant lower hysteresis compared to coils with ferrite cores, at the same time delivering higher power handling than the ferrite ones.
Recommended for bass section only.
Power handling 400 watts RMS.
Sorted by mH
-
Jantzen Audio Litz Wire Wax Coil
Jantzen Audio Litz Wire Wax Coil
The Litz Wire Wax Coil offers reduced skin effect and lowered resistance, compared to conventional wire based inductors, which in turn offers more dynamic head room and clearer sound.
We have impregnated our Litz Wire Coils in the same high quality wax used for the Wax Coil.
Making the Litz Wire Coils wax impregnated offers a much firmer coil and secures the windings in place (eliminating microphonic effect).
-
Mundorf MCoil VLCU
MCoil VLCU Paper Copper Film Inductors. Ultra-soft Abacá Esparto special paper as a dielectric medium dip-impregnated with viscoplastic insulation resin.
High mechanical damping of the coil-vibrations. Almost free of microphonic effect, even without a housing. Extremely calm acoustic pattern and the finest micro-dynamics. -
Mundorf MCoil VSCU
Copper Foil Paper
-
Mundorf MCoil VS iCore (resin-soaked)
Mundorf MCoil iCore (resin-soaked)