PoolidSiin on 5696 toodet.

Alamkategooria

• 

  Mundorf M-Coil

  MCoil Air Coils made from massive copper round-wire have been specially developed for high quality loudspeakers, which focus on achieving an utmost natural, detailed and acoustically balanced music performance. The acoustical properties of the L series can yet be significantly enhanced by applying Baked Wire Treatment - on air coils using wires with a larger cross-section - by Vacuum Impregnation. Baked Wire Treatment coils are listed as BL in the following table. Vacuum impregnated coils are marked VL. Technical specifications: OFC-Copper 99.99% Coil form: PA, fibre-glass reinforced Coil body heat resistant up to max. 230°C/446°F

• 

  Mundorf M-Coil BV

• 

  Mundorf M-Coil VL

  MCoil Air Coils made from massive copper round-wire have been specially developed for high quality loudspeakers, which focus on achieving an utmost natural, detailed and acoustically balanced music performance. The acoustical properties of the L series can yet be significantly enhanced by applying Baked Wire Treatment - on air coils using wires with a larger cross-section - by Vacuum Impregnation. Baked Wire Treatment coils are listed as BL in the following table. Vacuum impregnated coils are marked VL. Technical specifications: OFC-Copper 99.99% Coil form: PA, fibre-glass reinforced Coil body heat resistant up to max. 230°C/446°F

• 

  Mundorf MCoil VNCU ZeroOhm...

  Mundorf MCoil VNCU  ZeroOhm (resin-soaked)

• 

  Mundorf M-Coil LL Hepta Strand

  MCoil Hepta Strand coils unite the tonal clarity. beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils. alongside the harmonious-warmth and splendid brightness of strand copper wire.
  
  They are therefore the first choice for high quality high and mid frequency applications which focus on a finely detailed. utmost refined musical fidelity performed within a truly holographic life-like staging.

• 

  Mundorf M-Coil CF

• 

  Mundorf M-Coil transformer-core

• 

  Mundorf M-Coil CF transformer-core

• 

  Mundorf M-Coil BV transformer-core

• 

  MCoil VT transformer-core vacuum...

• 

  Mundorf M-Coil CF i-core

• 

  Mundorf M-Coil BV i-core

• 

  Mundorf M-Coil drum-core

  FERRIT Core Coils

  MCoil Drum core

  MCoil Drum-Core coils made from oxygenfree copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.

  The tonal quality of these coils is a convincing blend of the typical harmoniously-neutral sound of solid core copper round-wire and the natural vitality and enhanced tonal dynamic of HP3616.

  The fine properties of the H series can be further improved by applying Baked Wire Treatment as introduced with BH series.

  Specifications:
  Core material: HP 3616
  OFC-Copper 99.997%

• 

  Mundorf M-Coil drum-core BV

  FERRIT Core Coils

  MCoil Drum core

  MCoil Drum-Core coils made from oxygenfree copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.

  The tonal quality of these coils is a convincing blend of the typical harmoniously-neutral sound of solid core copper round-wire and the natural vitality and enhanced tonal dynamic of HP3616.

  The fine properties of the H series can be further improved by applying Baked Wire Treatment as introduced with BH series.

  Specifications:
  Core material: HP 3616
  OFC-Copper 99.997%

• 

  Mundorf M-Coil pin-core

• 

  Mundorf M-Coil rod-core

  ARONIT Core coils

  MCoil Rod core coils

  Aronit cores (also known as P cores) consist of high-density metal-ceramics-powder. The German- made Wicon ferrite rods produce extremely low distortion, even at very high loadings. Due to their highly compact dimensions, their low internal resistance and their excellent price/performance ratio they are particularly suitable as bass and subwoofer coils and for PA applications.

  MCoil Rod core coils combine the balanced, detailed and dynamic tone colour of OFC round wire with the low output distortions and internal resistance of Aronit cores. They are therefore an excellent choice for good value and compact yet high-capacity middle-low and low frequency coils, including for PA applications. The great features of line A as well as the transparent and undistorted music reproduction can be enhanced even further in line BA by using self-bonding wire.

  Technical specifications:
  Core material: ARONIT
  OFC-Copper 99.99%
  Coil form: PA, fibre-glass reinforced
  Coil body heat resistant up to max. 230°C/446°F

• 

  Mundorf M-Coil BV rod-core

• 

  Mundorf M-Coil CF rod-core

• 

  Mundorf M-Coil zero-ohm

• 

  Mundorf M-Coil CF silver

• 

  Mundorf M-Coil silver/gold

• 

  Jantzen Air Cored Wire Coil

  High-purity copper wire baked in perfect shape to create a distortion-free inductor, for all audio applications.

  Modern self-supporting design, low tolerance (+/-3%) and power handling dependent on the wire used, makes it the most versatile coil on the market.

  Description: Enamellled copper wire solderable with self-bonding topcoat, class 155, acc to IEC 60317-35, DIN EN 60317-3

  Production range: Grade 1B  0.30 0.40 0.50 0.63 0.70 0.80 1.00 1.20 1.40 1.60 1.80 mm

  Insulation: Polyurethane with aliphatic polyamide bondcoat

  Features: Temperature index of 155, solderability at 390°C without removing the enamel coating, bonded under action of heat

  Applications: Used for self supporting coils, windings for deflection yokes, watchmaking, loudspeaker coils, small motors

   

  Typical values for FLS 155 dia 1,00 mm Grade 1B, testing according to IEC 60851.1...6

   

  Mechanical properties:

  Flexibility: 10% 1 d

  Elongation: ³30 %

   

  Thermal properties:

  Temperature index: 155

  Cut through: ³ 200°C

  Heat shock at 175°C: 1xd

  Bonding temperature: 170-200°C

  Resoftening temperature: 155°C

   

  Electrical properties:

  Breakdown voltage: > 1,5 IEC

  Tangent delta /TD 300/: ³ 140

   

  Chemical properties:

  Solderability at 390°C: 8 s

   

   
• 

  Jantzen Audio Wax Coil

  This product has been revived through cooperation with our audio partners.
  
  The insulation used for Wax Coils is a special 60 μm quality paper. The coil is wound with the same 99,99% pure copper foil, also used for Cross Coils. Each coil is impregnated with a polymolecular paraffin Wax, making the coil hard as a rock! Each coil is tested with Clio system.
  
  Tolerance +/-2%
  Wax Coils are available in the following sizes:
  16AWG - 1,33 mm2 ,  coil height 24 mm
  14 AWG - 2.10 mm2, coil height 36 mm
  12 AWG - 3,29 mm2, coil height 54 mm
  8 AWG – 8,46mm, coil height 54mm
  
  Wax Coil 16 AWG sustains 350 Watts RMS
  Wax Coil 14 AWG sustains 500 Watts RMS
  Wax Coil 12 AWG sustains 650 Watts RMS
  
  

• 

  Jantzen Iron Cored Coils With Discs

  High-purity copper wire wound around a Permite core (or core + discs), for a high inductance at the lowest cost.

  Extremely low DCR which does not alter driver damping factor and loss of efficiency.

  The Permite material provides significant lower hysteresis compared to coils with ferrite cores, at the same time delivering higher power handling than the ferrite ones.

  Recommended for bass section only.

  Power handling 400 watts RMS.

  About baked wire used for Jantzen Induction coils:

  Description: Enamellled copper wire solderable with self-bonding topcoat, class 155, acc to IEC 60317-35, DIN EN 60317-3

  Production range: Grade 1B  0.30 0.40 0.50 0.63 0.70 0.80 1.00 1.20 1.40 1.60 1.80 mm

  Insulation: Polyurethane with aliphatic polyamide bondcoat

  Features: Temperature index of 155, solderability at 390°C without removing the enamel coating, bonded under action of heat

  Applications: Used for self supporting coils, windings for deflection yokes, watchmaking, loudspeaker coils, small motors

   

  Typical values for FLS 155 dia 1,00 mm Grade 1B, testing according to IEC 60851.1...6

   

  Mechanical properties:

  Flexibility: 10% 1 d

  Elongation: ³30 %

   

  Thermal properties:

  Temperature index: 155

  Cut through: ³ 200°C

  Heat shock at 175°C: 1xd

  Bonding temperature: 170-200°C

  Resoftening temperature: 155°C

   

  Electrical properties:

  Breakdown voltage: > 1,5 IEC

  Tangent delta /TD 300/: ³ 140

   

  Chemical properties:

  Solderability at 390°C: 8 s

   
• 

  Jantzen C-Coil - Toroidal Core

  C-Coil is wound around a sandwich core, and it has extremely low resistance and can shift a large amount of power without getting over heated.

  The core is formed like a donut with a round cross section, and it is wound from one long piece of laminated steel tape.
  The surface of the core is epoxy coated to secure against short circuit even at a very high load.

  We have tested the inductor with a carrying load of 1000 Watt, and it lasted and stood up well.
  It can stand upto 700 Watt per 48 hrs in one go.

  We are very satisfied with the result.
  The C-Coil is designed for Bass, Sub-Woofer and Amplifiers, in different core and wire sizes.

  Please note!

  The C-Coil cannot be measured using a universal LC meter. Due to the characteristics of the core and winding method, it is important to use a professional RLC meter. We measure all C-Coils before shipping them using a professional RCL meter at AC 1 V 1 kHz.

• 

  Jantzen Audio Cross Coil

  The Cross Coil has been developed in cooperation with Audio Technology, Denmark, producing high-end drivers for the world market.

  No chain is stronger than its weakest link. This is especially so when we speak of loudspeakers, where there is often a cost reduction for crossover inductors. The result is distortion and power loss.

  High-end loudspeaker producers overcome this problem by using foil coils, where the copper is flat instead of round.

  Cross Coils are available in 12, 14 and 16 AWG.

  On special request we can also offer Cross Coils in 8 AWG

• 

  Jantzen Audio Iron Coil

  High-purity copper wire wound around a Permite core, for a high inductance at the lowest cost.

  Extremely low DCR which does not alter driver damping factor and loss of efficiency.

  The Permite material provides significant lower hysteresis compared to coils with ferrite cores, at the same time delivering higher power handling than the ferrite ones.

  Recommended for bass section only.

  Power handling 400 watts RMS.

  Sorted by mH

• 

  Jantzen Audio Litz Wire Wax Coil

  Jantzen Audio Litz Wire Wax Coil

  The Litz Wire Wax Coil offers reduced skin effect and lowered resistance, compared to conventional wire based inductors, which in turn offers more dynamic head room and clearer sound.

  We have impregnated our Litz Wire Coils in the same high quality wax used for the Wax Coil.

  Making the Litz Wire Coils wax impregnated offers a much firmer coil and secures the windings in place (eliminating microphonic effect).

• 

  Mundorf MCoil VLCU

  MCoil VLCU Paper Copper Film Inductors. Ultra-soft Abacá Esparto special paper as a dielectric medium dip-impregnated with viscoplastic insulation resin.
  
  High mechanical damping of the coil-vibrations. Almost free of microphonic effect, even without a housing. Extremely calm acoustic pattern and the finest micro-dynamics.

• 

  Mundorf MCoil VSCU

  Copper Foil Paper

• 

  Mundorf MCoil VS iCore (resin-soaked)

  Mundorf MCoil iCore (resin-soaked)