SB Acoustics SATORI MW16TX-4 Woofer

Features

• Advanced TeXtreme® cone
• Vented aerodynamic cast aluminium chassis
• Soft low damping rubber surround
• Advanced BIMAX spider
• Powerful optimized low distortion neodymium motor system
• Extended copper sleeve on pole piece
• Non-conducting fiberglass voice coil former
• Vented pole piece and voice coil
• Light weight CCAW voice coil
• Long life silver lead wires

Specs

• Nominal Impedance 4 Ω
• DC resistance, Re 3.4 Ω
• Voice coil inductance, Le 0.15 mH
• Effective piston area, Sd 119 cm²
• Voice coil diameter 36 mm
• Voice coil height 17 mm
• Air gap height 5 mm
• Linear coil travel (p-p) 12 mm
• Magnetic flux density 1.17 T
• Magnet weight 0.13 kg
• Net weight 1.01 kg
• Free air resonance, Fs 29 Hz
• Sensitivity (2.83V/1m) 90.5 dB
• Mechanical Q-factor, Qms 5.0
• Electrical Q-factor, Qes 0.29
• Total Q-factor, Qts 0.27
• Moving mass incl. air,Mms 12.6 g
• Force factor, Bl 5.2 Tm
• Equivalent volume, Vas 48 liters
• Compliance, Cms 2.39 mm/N
• Mechanical loss, Rms 0.46 kg/s
• Rated power handling* 60 W

* IEC 268-5, T/S parameters measured on drive units that are broken in.