More info
Audes ATA-134SE Stereo Tube Amplifier - special limited edition
Available while stock lasts!
ATA-134 is a stereo tube amplifier, which employs EL34 tubes working in triode mode. The amplifier operates in Class AB without using negative feedback. ATA-134 was designed from scratch and benefits from the use of custom-made transformers designed and manufactured by Audes, including separate filament and High Tension anode toroidal core types with precise winding sectioning and low primary current. Special split-tape-wound-core output transformers, which employ thin high-quality steel, were developed specifically for the ATA-100 tube amplifier series.
Special edition: Only high-quality selected components are used: all resistors are carbon film, power electrolytic capacitors are 4-pole expensive audio grade and audio circuit capacitors are of CPIO (Copper-paper in oil) type produced by Jensen. Cabinet is royal high-gloss paint
Technical Specifications
Rated continuous output power | 15 W + 15 W (0 dB) Class AB |
Frequency range | 20–20000 Hz −1.0 dB |
Total harmonic distortion | <1% |
Signal-to-noise ratio | >90 dB |
Input sensitivity | 1.1 V |
Number of inputs | 2 |
Input impedance | 50 kΩ |
Loudspeaker impedance | 4–8 Ω |
Recommended loudspeaker sensitivity | 87 dB/1 W/1 m |
Tubes in the preamplification stage | 6N1P-EV (Vene: 6Н1П-ЕВ) × 2 tk |
Tubes in the power amplification stage | EL34 × 4 tk |
Dimensions (mm) | 250 H × 460 W × 380 D |
Dimensions (inches) | 9⅞" H × 18⅛" W × 15" D |
Weight | 22 kg/40 lb |
Due to product weight and size shipping is not included. We will quote you shipping to your destination