SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
search
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8

SB17CAC35-8
64.90 € Tax excluded
80.48 € tax incl. for EU buyers

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8

Quantity
In Stock

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8

Special Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Geometrically reinforced ceramic cone for optimum piston operation and reduced break-up
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specifications:

Nominal Impedance 8 Ω Free air resonance, Fs 28 Hz
DC resistance, Re 5.7 Ω Sensitivity (2.83 V / 1 m) 86.5 dB
Voice coil inductance, Le 0.15 mH Mechanical Q-factor, Qms 4.46
Effective piston area, Sd 118 cm2 Electrical Q-factor, Qes 0.40
Voice coil diameter 35.5 mm Total Q-factor, Qts 0.36
Voice coil height 16 mm Moving mass incl.air, Mms 15.4 g
Air gap height 5 mm Force factor, Bl 6.2 Tm
Linear coil travel (p-p) 11 mm Equivalent volume, Vas 42 liters
Magnetic flux density 1.0 T Compliance, Cms 2.13 mm/N
Magnet weight 0.54 kg Mechanical loss, Rms 0.6 kg/s
Net weight 1.56 kg Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB17CAC35-8
Comments (0)
No customer reviews for the moment.